Request Information
Sentinel 150P, 24 V/5 A nominal output.
Unit of Measure

Specifications

Model Number

 N/A SNTL150P2405CDLA

Electrical Connections

 N/A
Electrical Connections for Sentinel 150P Programmable Switch Mode Chargers

Power Supply

Alternate Current (AC) Operating Voltage

 N/A 95 to 265 V

Operating Frequency

 N/A 47 to 63 Hz

Direct Current (DC) Charge Output

Direct Current (DC) Nominal Voltage

 N/A 24 V

Maximum Current Limit

 N/A 5 A

Voltage Ripple

 N/A <1 %

Line Regulation

 N/A <2 %

Load Regulation

 N/A <2 %

Inputs and Outputs

Control Input

 N/A Close to -DC to Activate Digital (Switch) Input Programmable Function

Alarm Output

 N/A Programmable Function Relay Switched +DC

Maximum Current Rating at 30 Direct Current (DC) Voltage (Alarm Output)

 N/A 1 A

Physical

Protective Cover Material

 N/A 1050 Aluminum

Protective Cover Thickness

 N/A 1.2 mm

Operating Temperature

 N/A -30 to 60 ºC-22 to 140 ºF

Storage Temperature

 N/A -40 to 60 ºC-40 to 140 ºF

Relative Humidity

 N/A 20 to 90 %

Electrical Safety

 N/A 2006/95/EC (EN 60065)

Electromagnetic Compatibility

 N/A 2004/108/EC (EN 61000-6-2, EN 61000-6-4)

Dimensions

Overall Width (W)

 N/A 4.28 in108.6 mm

Overall Height (H)

 N/A 5.31 in135 mm

Overall Depth (D)

 N/A 2.17 in55 mm

Fixing Holes (X)

 N/A 3.90 in99 mm

Fixing Holes Diameter (F)

 N/A 0.22 in5.65 mm

Weight

 N/A 1.65 lb0.75 kg

Standard Output Calibration

Output Calibration Information

 N/A Standard and custom output calibrations are selected using the SNTL150P-PCSUITE software tool. Calibration figures shown below are at 20 ºC. If temperature compensation is enabled, and remote SNTL-RTC temperature sensor connected, output voltage automatically varies by 3 mV per cell per 1 ºC deviation from 20 ºC, within the range -10 to +50 ºC. Increasing temperatures give decreasing outputs; decreasing temperatures give increasing outputs.

Output Calibration Specification Table

 N/A
Output Calibration Specification Table for Sentinel 150P Programmable Switch Mode Battery Chargers

Features

Features

 N/A
  • Switch mode power supply technology: light and compact, power efficient with low heat dissipation.
  • Multi-stage, low ripple charging: 12 V/5 A or 24 V/5 A.
  • Versatile: OEM-configuration gives optimized output for different battery types, plus programmable I/O functions.
  • AutoBoost and temperature compensation.
  • Open-frame with protective cover, for surface mounting inside a panel.
  • For stationary engine, genset and standby power applications.

AutoBoost

AutoBoost

 N/A The optimum charge voltage for lead acid and NiCd batteries varies with ambient temperature. Sentinel can be configured to sense battery temperature from a remote sensor and automatically compensate the output charge voltage.

Alarm Output and Control Input ('A' Option)

Alarm Output and Control Input ('A' Option)

 N/A The optimum charge voltage for lead acid and NiCd batteries varies with ambient temperature. Sentinel can be configured to sense battery temperature from a remote sensor and automatically compensate the output charge voltage.

Temperature Compensation

Temperature Compensation

 N/A The optimum charge voltage for lead acid and NiCd batteries varies with ambient temperature. Sentinel can be configured to sense battery temperature from a remote sensor and automatically compensate the output charge voltage.

Versatile

Versatile

 N/A The Sentinel 150P uses an open circuit board construction with an aluminum protective cover, for surface mounting in an existing control panel. Electrical connection is by quick-connect, two-part type terminal blocks.

Installation and Connection

Installation and Connection

 N/A Stock Code - 42.70.3619
Description - RTC sensor for remote temperature compensation feature, complete with 3 m/9.8 ft lead assembly. Non-standard lengths available to special order.

Stock Code - 42.70.3825
Description - SNTL150P-PCCONN programming kit. Includes SNTL150P-PCSUITE software tool (PC compatible), USB-TTL interface and power/data connection leads.

Accessories

Accessories

 N/A Stock Code - 42.70.3619
Description - RTC sensor for remote temperature compensation feature, complete with 3 m/9.8 ft lead assembly. Non-standard lengths available to special order.

Stock Code - 42.70.3825
Description - SNTL150P-PCCONN programming kit. Includes SNTL150P-PCSUITE software tool (PC compatible), USB-TTL interface and power/data connection leads.

Warranty

Warranty

 N/A A two year limited warranty on materials and workmanship is given with this product, details available on request.

Note

Note

 N/A All part numbers are supplied with output calibrated for vented lead-acid cells. Output calibration can be optimized for different battery types by using the SNTL150P-PCSUITE software tool.

Dimensions for reference only. Use actual product for mounting template. For safe heat dissipation, mount product in orientation shown, with minimum air-gap clearance of 40 mm/1.5 in. above/below and 25 mm/1.0 in. at each side.