The PowerView PV101 display is a multifunction tool that enables equipment operators to view standard engine and transmission parameters and active/stored trouble codes. The display can show a single or a fourparameter simultaneous display with text descriptions for most common fault conditions. The enhanced alarm indicators have ultra-bright alarm and shut-down LEDs. 4.30 in. (109 mm) 1.60 in. (41 mm) 0.83 in. (21 mm)2.51 in. (64 mm) 3.70 in. (94 mm) Alarm-YellowShutdown-Red 1.992 in. (51 mm) 1.942 in. (49 mm) 1.972 in. (50 mm) R 0.062 in. (1.6 mm)0.125 in. (3 mm) 2.062 in. (52 mm) diameter .953 in. (24 mm) Dimensions Additional features for the Tier 4/Euro Stage IV (PV101-C-T4) models include: • The menu offers Auto Regen, Request Regen and Inhibit Regen. Visible icons indicate: • Active Regeneration • Diesel Exhaust Fluid Level (DEF) • Diesel Particulate Filter (DPF) Restricted • Inhibit Regeneration or High Exhaust Temp • After Treatment Fault • OEM Menu – A password protected menu offers access to MODBUS Setup, Engine Speed Control ON/OFF, DEF Regen Menu ON/OFF, SCR Enable Disable and other critical menu items that require restricted access. • TSC1 (Torque Speed Control) – Allows users to set run speed via CAN if supported by engine manufacturer. • Additional 4-Up Screen – Allows user to have two 4-Up screens to toggle between. Second user configurable screen is defaulted to show Tier 4 Parameters: DEF Level (Diesel Exhaust Fluid Level), DPF Active Regen Status, Exhaust Filter Outlet Temp and Exhaust Filter Inlet Temp. • Shows SPN, FMI and OC for all faults. • PV101-C Configuration Tool – PC tool allows users to create, view, edit and download configurations for the PV101-C. PowerView® PV101 Engine and Diagnostic Display All models Tier 3/Euro Stage III and earlier (PV101-A) and Tier 4/Euro Stage IV (PV101-C-T4) share the following features: • Multiple language options − English, Spanish, German, Italian, French, Brazilian Portuguese, Chinese, Japanese, Czech and Russian. • Sender Input − Select between backlight dimmer function or fuel level. Can be calibrated to use nonMurphy fuel senders. • Service Reminders – Five service reminders allow users to set hours for: Change Engine Oil, Air Filters, Hydraulic Oil, and Service Engine and Service Machine. • Select Source Address – Select the exact address the PV101 will claim on the bus. • The ability to select CAN bus Data Rate. • Displays more than 50 standard SAE J1939 parameters. • Shows helpful troubleshooting description of supported parameters.